ServSafe Manager Practice Test (90 Questions & Diagnostic Review)

Comminuted (ground) meats such as ground beef and ground pork must be cooked to 155°F (68°C) for at least 17 seconds to destroy Shiga toxin-producing E. coli.

Refrigerated TCS foods must be maintained at 41°F (5°C) or colder at all times to slow bacterial growth of pathogens like Listeria monocytogenes.

In stage one of the two-stage cooling process, cooked food must be cooled from 135°F to 70°F within 2 hours, as bacteria multiply most rapidly between 125°F and 70°F.

If food has not reached 70°F within 2 hours, it must either be reheated to 165°F (74°C) for 15 seconds within 2 hours and restarted in cooling, or completely discarded.

The total allowable cooling duration is 6 hours: 2 hours to cool from 135°F to 70°F, and 4 hours to cool from 70°F to 41°F or below.

TCS food that is cooked, cooled, and reheated for hot holding must be rapidly reheated to an internal temperature of 165°F (74°C) for 15 seconds within 2 hours.

Hot TCS foods must be held at 135°F (57°C) or higher to prevent spores of Clostridium perfringens and Bacillus cereus from germinating and producing toxins.

Intact steaks, pork chops, and commercially raised game require cooking to 145°F (63°C) for at least 15 seconds.

Raw animal foods cooked in a microwave must be rotated or stirred, covered, heated to at least 165°F (74°C) in all parts, and allowed to stand covered for 2 minutes to equalize temperature.

Ready-to-eat TCS food may be held at 41°F (5°C) or lower for a maximum of 7 days, with day of preparation counting as Day 1.

Thawing at room temperature allows the outer surface of the food to enter the Temperature Danger Zone (41°F-135°F) for extended hours while the interior remains frozen.

The Temperature Danger Zone is 41°F to 135°F (5°C to 57°C), with the most rapid bacterial growth occurring between 70°F and 125°F.

Cold food may be held without temperature control for up to 6 hours if it is held at 41°F or below before removal and does not exceed 70°F during the 6-hour period.

Hot food can be held without temperature control for a maximum of 4 hours, provided it was held at 135°F or above prior to removal.

Whole roasts may be cooked according to alternative time-temperature schedules, including 130°F for 112 minutes or 145°F for 4 minutes.

Thermocouples with small-diameter needle probes accurately measure the core temperature of thin food items without requiring deep immersion.

The ice-point calibration method requires immersing the sensing area into a 50/50 crushed ice and cold water slurry until steady at 32°F (0°C).

Food temperature measuring devices must be accurate to within ±2°F (±1°C) across their intended operating range.

Fruits, vegetables, and grains cooked for hot holding must reach a minimum internal temperature of 135°F (57°C).

The complete handwashing cycle must take at least 20 seconds, including at least 10 to 15 seconds of vigorous scrubbing with soap and warm water (≥100°F).

Workers diagnosed with Norovirus, Hepatitis A, Shigella, STEC, Salmonella Typhi, or Non-typhoidal Salmonella must be completely excluded from the facility.

A worker with sore throat and fever is restricted in normal restaurants, but must be completely EXCLUDED if the facility primarily serves a highly susceptible population.

Food handlers may wear only a single plain ring, such as a smooth wedding band, with no gemstones or engravings that could harbor pathogens or dislodge.

Bare-hand contact with ready-to-eat food is strictly prohibited unless the regulatory authority has granted a specific written variance with extensive employee health and verification procedures.

A handwashing sink must be equipped to provide potable water through a mixing valve or combination faucet at a temperature of at least 100°F (38°C).

Lesions and wounds on hands or wrists must be covered with an impermeable cover (bandage/finger cot) plus a single-use glove worn over the cover.

Vomiting and diarrhea are primary symptoms of acute foodborne illnesses requiring immediate exclusion from the facility until symptom-free for at least 24 to 48 hours.

The 9 major food allergens under federal law are Milk, Eggs, Fish, Crustacean Shellfish, Tree Nuts, Peanuts, Wheat, Soybeans, and Sesame.

Cross-contamination refers to microorganisms transferred between foods (which cooking can destroy), whereas cross-contact transfers allergenic proteins that heat and cooking CANNOT remove.

Raw animal foods must be placed beneath ready-to-eat foods to prevent juices containing pathogens from dripping onto foods that will receive no further cooking.

Using contaminated cutting surfaces transfers live pathogens (Salmonella, Campylobacter) from raw poultry directly to ready-to-eat lettuce, creating an acute outbreak hazard.

Copper, zinc (galvanized metal), brass, and pewter leach toxic heavy metals into acidic foods (pH <6.0), causing acute heavy metal chemical poisoning.

The three-compartment sink sequence is Wash (detergent at ≥110°F), Rinse (clean warm water), and Sanitize (chemical solution or ≥171°F hot water for 30s), followed strictly by air drying.

Chlorine sanitizing solutions must have a minimum concentration of 50 ppm (up to 100 ppm) with appropriate water temperature (≥75°F or ≥100°F depending on pH).

All equipment and utensils must be AIR-DRIED before storage or use. Towel drying reintroduces pathogens and lint from contaminated cloths.

The wash compartment containing detergent solution must be maintained at a temperature not less than 110°F (43°C) to effectively dissolve grease and food residues.

Hot water immersion sanitization in a manual sink requires water at or above 171°F (77°C) with the item completely submerged for at least 30 seconds.

A test kit or other device that accurately measures concentration in ppm (parts per million) must be provided to verify that sanitizing solutions meet statutory strength.

Equipment and utensils in continuous contact with TCS food held at room temperature must be disassembled, cleaned, and sanitized at least every 4 hours.

Principle 1 of HACCP is to conduct a hazard analysis by evaluating the menu to identify biological, chemical, or physical hazards associated with each process step.

Curing food, smoking food for preservation, operating molluscan shellfish display tanks, custom processing animals, and reduced-oxygen packaging (ROP) require a formal regulatory variance and HACCP plan.

A critical limit is a measurable criterion (e.g. 165°F internal temperature for 15 seconds) that separates safe acceptable operations from unsafe unacceptable conditions at a CCP.

Under ANSI-CFP accreditation standards, candidates must achieve a minimum scaled score of 75% (at least 60 correct answers out of 80 scored questions).

Sewage backups, extended power outages, loss of potable water supply, and structural fires represent imminent health hazards requiring immediate cessation of operations.

Health inspectors presenting official credentials must be allowed immediate access to all food storage, preparation, warewashing, and waste handling areas during business hours.

A designated Person in Charge possessing certified food safety knowledge must be physically present on site during all operating hours to enforce statutory hygiene and food safety rules.

Clostridium botulinum is an anaerobic spore-former that produces deadly neurotoxins in low-oxygen, low-acid environments (canned goods, vacuum-sealed bags, foil-wrapped potatoes at room temp).

Norovirus is the number one cause of foodborne illness in the United States, characterized by high contagiousness and transmission via infected food worker hands.

Swollen or severely dented cans may contain Clostridium botulinum neurotoxin and must be rejected immediately.

Commercially processed ready-to-eat food requires heating to only 135°F (57°C) for hot holding because pathogens were destroyed during factory processing.

Wiping with an apron transfers pathogens across foods; surfaces must be washed, rinsed, and sanitized.

Tattoos are skin pigmentation and do not pose a food safety hazard under the FDA Food Code.

Quats require at least 30 seconds of contact time to achieve the required 5-log pathogen reduction.

Swollen or severely dented cans may contain Clostridium botulinum neurotoxin and must be rejected immediately.

Commercially processed ready-to-eat food requires heating to only 135°F (57°C) for hot holding because pathogens were destroyed during factory processing.

Wiping with an apron transfers pathogens across foods; surfaces must be washed, rinsed, and sanitized.

Tattoos are skin pigmentation and do not pose a food safety hazard under the FDA Food Code.

Quats require at least 30 seconds of contact time to achieve the required 5-log pathogen reduction.

Swollen or severely dented cans may contain Clostridium botulinum neurotoxin and must be rejected immediately.

Commercially processed ready-to-eat food requires heating to only 135°F (57°C) for hot holding because pathogens were destroyed during factory processing.

Wiping with an apron transfers pathogens across foods; surfaces must be washed, rinsed, and sanitized.

Tattoos are skin pigmentation and do not pose a food safety hazard under the FDA Food Code.

Quats require at least 30 seconds of contact time to achieve the required 5-log pathogen reduction.

Swollen or severely dented cans may contain Clostridium botulinum neurotoxin and must be rejected immediately.

Commercially processed ready-to-eat food requires heating to only 135°F (57°C) for hot holding because pathogens were destroyed during factory processing.

Wiping with an apron transfers pathogens across foods; surfaces must be washed, rinsed, and sanitized.

Tattoos are skin pigmentation and do not pose a food safety hazard under the FDA Food Code.

Quats require at least 30 seconds of contact time to achieve the required 5-log pathogen reduction.

Swollen or severely dented cans may contain Clostridium botulinum neurotoxin and must be rejected immediately.

Commercially processed ready-to-eat food requires heating to only 135°F (57°C) for hot holding because pathogens were destroyed during factory processing.

Wiping with an apron transfers pathogens across foods; surfaces must be washed, rinsed, and sanitized.

Tattoos are skin pigmentation and do not pose a food safety hazard under the FDA Food Code.

Quats require at least 30 seconds of contact time to achieve the required 5-log pathogen reduction.

Swollen or severely dented cans may contain Clostridium botulinum neurotoxin and must be rejected immediately.

Commercially processed ready-to-eat food requires heating to only 135°F (57°C) for hot holding because pathogens were destroyed during factory processing.

Wiping with an apron transfers pathogens across foods; surfaces must be washed, rinsed, and sanitized.

Tattoos are skin pigmentation and do not pose a food safety hazard under the FDA Food Code.

Quats require at least 30 seconds of contact time to achieve the required 5-log pathogen reduction.

Swollen or severely dented cans may contain Clostridium botulinum neurotoxin and must be rejected immediately.

Commercially processed ready-to-eat food requires heating to only 135°F (57°C) for hot holding because pathogens were destroyed during factory processing.

Wiping with an apron transfers pathogens across foods; surfaces must be washed, rinsed, and sanitized.

Tattoos are skin pigmentation and do not pose a food safety hazard under the FDA Food Code.

Quats require at least 30 seconds of contact time to achieve the required 5-log pathogen reduction.

Swollen or severely dented cans may contain Clostridium botulinum neurotoxin and must be rejected immediately.

Commercially processed ready-to-eat food requires heating to only 135°F (57°C) for hot holding because pathogens were destroyed during factory processing.

Wiping with an apron transfers pathogens across foods; surfaces must be washed, rinsed, and sanitized.

Tattoos are skin pigmentation and do not pose a food safety hazard under the FDA Food Code.

Quats require at least 30 seconds of contact time to achieve the required 5-log pathogen reduction.

Swollen or severely dented cans may contain Clostridium botulinum neurotoxin and must be rejected immediately.